English 한국어 Español ภาษาไทย عربي ، русский язык Portugiesisch Deutsch
+86-757-85230433
Home / Line Array Speaker / VS-210+VS-215 Active Line Array Sound System

VS-210+VS-215 Active Line Array Sound System

Use Parts: 1 SET
Supply Ability: 10000 SET
Payment Terms: TT , LC , Others
Tags:
BrandVS-210 / VS-215 Active line array bass
ColorBlack
Use Parts1 SET
Supply Ability10000 SET
Payment TermsTT , LC , Others

PRODUCT INTRODUCTION:

The VS-215 active ultra-low speaker has a single-channel power amplifier module with high-performance digital signal processing system. It is equipped with a high-performance DSP digital audio signal processor, which can set various scene parameters according to different application requirements. It can be controlled by the control software and the quick key. The power amplifier module used in the VS-215 adopts the high-efficiency class D power amplifier circuit design. It uses the patented L-type heat dissipation design combined with the integrated cast aluminum backplane with heat dissipation function. It has high energy conversion efficiency and power up to 1500W, while being compact and stable.
The VS-215 is a compact, high-performance active subwoofer that is driven by a single channel of the amplifier. It has the same design as the VS-210, and the cabinet uses a specific four-point hanging device. Two high-power long-stroke 15" bass drive units are housed in a box with a universal design. The VS-215 can be used as a low-frequency extension of the VS-210 full-range speaker and can be used in a variety of different combinations; such as ground stacking or hanging Hang it, or install it on top of the VS-210 array or as a stand-alone low-frequency speaker set.
The VS-215's cabinet is made of sturdy birch multi-layer plywood. The surface is treated with environmentally-friendly water-based paint. It is waterproof, moisture-proof and wear-resistant. The front panel of the speaker is protected by a solid metal mesh. The side panels are equipped with handles for easy transportation.

Structure Diagram:


TECHNIQUE SPECIFICATION:

Product Model VS-215
Driver 2×15" (380mm)
Frequency range(±3dB) 40Hz~300Hz
MAX SPL 140dB (peak)
Power amplifier module
DSP processing, class D digital amplifier
Amplifier channel / power
Single channel, 1500W/8Ω
Input sensitivity
1.0V 
Input/Output XLR(Balance)
Supply Voltage AC110V~250V,50Hz/60Hz
Product Size(HXWXD) 440mm×730mm×878.5mm
Net Weight 67.5 Kg


PRODUCT INTRODUCTION:

The VS-210 active full-range speaker has a two-channel power amplifier module with high-performance digital signal processing system. It is equipped with a high-performance one-in-two-out DSP digital audio signal processor, which can be set according to different application requirements and different number of speakers. Various scene parameters. It can be adjusted by the control software and quick key, which greatly simplifies the system construction process and achieves the best effect in a very short time. The VS-210 uses a power amplifier module with an efficient Class D power amplifier circuit design. It uses a patented L-type thermal design combined with an integrated cast aluminum backplane with heat dissipation. It has high energy conversion efficiency and power up to 300W+. 900W, compact in size and stable in performance.

VS-210 compact active linear array speaker with external two-way design, all units are selected by top-level unit manufacturers, integrated with two high-power 10-inch neodymium woofer and two 1.75 inches The voice coil's neodymium treble driver loads an equal path planar acoustic waveguide to the tube, providing a 100° horizontal constant coverage angle and a 10 degree vertical coupling angle. The precision design makes full use of the energy of the 10-inch woofer, enhances the mid-low frequency efficiency, and loads the specially designed phase plug. With this phase plug, one sound source is divided into two sound sources, and the spacing of the sound source is thus reduced by half, thus VS The upper limit of the operating frequency of the -210 vertical array line source is also doubled. This design application not only increases the efficiency of the intermediate frequency but also effectively improves the frequency response characteristics when multiple VS-210s are combined into a vertical line array; VS- The 210 body is made of sturdy birch multi-layer plywood and the surface is treated with two-component polyurea spray, which is waterproof, moisture-proof and wear-resistant. The front panel of the speaker is protected by a sturdy metal mesh, and is covered with a replaceable acoustic sound-transparent mesh, combined with a four-point suspension system to maximize the acoustic design and mechanical integrity.
VS-210 has more IF energy, high efficiency and dynamic performance. As an independent speaker system, the small size, light weight and high energy output are the best choice for language, music, theater and various types of performances. From the indoor large and medium-sized theaters, large conference centers, auditoriums, art centers, multi-purpose halls, stadiums for fixed installation and use, to outdoor small and medium-sized live performances can have excellent performance.


Structure Diagram:



TECHNIQUE SPECIFICATION:

Product Model VS-210
Driver LF 2×10 inch (250mm) neodymium 
HF 2×1.75 inch (44mm) neodymium 

Frequency range(±3dB) 55Hz~18KHz
MAX SPL 136dB (peak)
Power amplifier module
1 input and 2 output DSP, Class D digital power amplifier
Amplifier channel / power
2 channels, 300W/8Ω+900W/8Ω
Input sensitivity
1.0V
Input/Output XLR (Balance)
Supply Voltage AC110V~250V,50Hz/60Hz
Product Size(HXWXD) 271.4 ×734 ×373 mm
Net Weight 31.5 Kg 


Send a message to us

Contact Us

+86-757-85230433
Songshi Road, Shashui Village, Songgang, Shishan Town, Nanhai Dist..Foshan City, Guangdong Provice, China
Official Website of Vietnam:www.cafaudio.vn
Agent in Vietnam:Audio Visual Vietnam Investment Corporation

Company Details

Foshan City Nanhai Kafu Professional Audio Equipment Factory was founded in 2006, located in Foshan, China. With more than 10 years operating, we have built up mature products technology, high quality production system and after sale service system. Our products include passive&active line array speakers, full range speakers, subwoofer, power amplifiers, digital processors and peripheral products and and all accessories, which have been successfully applied in public entertainment market, government affairs,business conference, public cultural and sports market.
Foshan City Nanhai Kafu Professional Audio Equipment Factory